Speckled, textured, forgiving floors for garages, workshops and utility spaces, installed in a single day by a Santa Clarita crew you can call directly.
Flake epoxy flooring is a decorative coating where colored flakes are scattered into a wet epoxy basecoat and sealed under a clear protective topcoat. Elevate Epoxy Flooring installs the complete flake system in one day, from diamond grinding to final topcoat, for homes and small businesses across the Santa Clarita Valley and neighboring areas.
Walk into a well-finished garage or shop and the floor you notice is usually a flake floor: a multi-tone, speckled surface that looks a bit like polished stone. The flakes are the reason it works so well in real life. Their pattern breaks up the eye, so dust, footprints and small drips blend in instead of standing out, which keeps the floor looking tidy between cleanings. The flakes also add a fine texture that gives a little traction underfoot. Underneath that decorative layer sits a thick epoxy basecoat that does the structural work of bonding to the concrete and protecting it from moisture and wear.
We build flake floors for property owners from Valencia and Newhall to Simi Valley, the San Fernando Valley and the Antelope Valley. Elevate Epoxy Flooring is a service-area business, so there is no showroom to visit. Instead we come to you, look over the slab, show you flake samples and talk through the finish that suits the space. You get a defined scope of work, a crew that protects the area around the job, and a limited lifetime adhesion warranty once the floor is complete. Because the full system goes in during one visit, your space is out of service for as little time as possible.
The full flake system, from grinding to topcoat, goes in during one visit. That means less disruption for your household or business and a quick return to using the space.
The speckled pattern hides dust, footprints, small scratches and minor drips, so the floor looks cleaner for longer than a solid gloss color would between washes.
Flake and a fine broadcast texture give shoes and tires a little more grip than a smooth coating, which helps in spaces that sometimes get wet or oily.
Choose from flake and marble flake blends in neutral and bold palettes. Our color chart helps you compare options before the crew arrives with samples.
A diamond-ground bonding profile and a moisture-barrier epoxy basecoat give the system a strong foundation, so the coating stays attached to the concrete rather than lifting off.
The UV-stable polyaspartic topcoat guards the flakes against sun and chemicals and resists hot-tire pickup, and it is backed by a limited lifetime adhesion warranty from Elevate.
Every flake floor we install follows the same sequence. First comes diamond grinding to open the concrete, followed by a thorough vacuum. Next we handle crack and joint repair so the slab is sound and even. Vertical coating is applied wherever the floor meets walls or steps. Then the moisture-barrier epoxy basecoat is rolled out, and while it is still wet we complete the flake broadcast. After the basecoat sets, we scrape and vacuum the surface to lift any loose flake and leave a smooth, even texture, and the UV-stable polyaspartic topcoat is applied last to lock the whole system in place.
A full-rejection flake broadcast means we keep tossing flake into the wet basecoat until it can hold no more, and the extra simply sits on top. That approach gives complete coverage with no hidden gaps where the basecoat color might peek through, and it produces an even, dense pattern across the whole floor. Lighter broadcasts leave a see-through look and a rougher feel. After the coating has firmed up, the excess is scraped and vacuumed away, which also smooths the surface so the topcoat lays down evenly. The result is a uniform floor that looks the same from edge to edge and wears evenly over time.
Color is the fun part of a flake project. Our flake and marble flake collections cover everything from soft grays and tans to bold multi-color blends, and the color chart on this site is a good place to start narrowing things down. Lighter blends feel bright and open in a garage but show more contrast with dark tire marks, while mid-tone and darker blends hide wear well. We usually suggest looking at samples in the actual space, because garage lighting changes how a blend reads. If you cannot decide, tell us how you use the floor and we will recommend two or three options.
Flake suits any space that needs a durable, good-looking floor without a long shutdown. Two-car garages are the classic fit, but we also coat workshops, laundry rooms, mudrooms, utility areas, storage rooms and light commercial spaces such as small shops and back-of-house areas. Cleaning is straightforward: sweep, then mop with a mild cleaner. The textured surface gives better footing than a smooth glossy coating, which matters near vehicles or wet shoes. If a space needs a flatter, uniform appearance instead of a speckled one, we will steer you toward a solid color system, and for premium showrooms we may suggest metallic.
The flake system is a one-day install. Your crew arrives, completes every step from grinding to topcoat, and cleans up before leaving. After the topcoat sets, light foot traffic is possible, and we tell you the exact timing that day. Wait to move furniture back, roll heavy carts or drive vehicles in until the recommended period has passed, since the coating is still hardening toward full cure. Plan to keep sharp, heavy impacts and harsh chemical cleaners away for the first several days while the floor finishes curing.
Choose flake when you want a durable, textured, forgiving floor in a single day. Solid color is the better pick if you prefer a smooth, uniform look and can allow 3 days. Metallic, at 3-4 days, creates a swirling, high-impact surface for showrooms or feature rooms. Quartz, at 2-3 days, is tougher and more textured for hard-working areas. For a clear sealed concrete look with no decorative layer at all, consider grind and seal. Garage owners often start with flake and never look back.
Typical ranges for the Santa Clarita Valley. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed October 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate. See the color chart to pick your color.
Neither is simply better. Epoxy bonds well to prepared concrete, builds thickness, and works as a moisture-barrier basecoat. Polyaspartic resists sun yellowing and cures fast, which makes it a strong topcoat. For most garages the best system pairs an epoxy basecoat with a polyaspartic topcoat, so each material does the job it does best.
Read the answer →A well-prepared floor with a UV-stable topcoat usually looks much like it did at install, with some loss of gloss and light surface marks where cars and tools see the most use. Floors with thin coatings, plain epoxy topcoats, or poor prep can show yellowing, scuffing, or lifting by year five.
Read the answer →Choose flake for the best value and the most forgiving look, solid color for a clean uniform floor, and metallic for a one-of-a-kind showpiece. Flake takes about one day, solid color three days, and metallic three to four. Flake costs $6.50 to $10 per square foot, solid $9.50 to $11.50, and metallic $12.50 to $18.50.
Read the answer →Our minimum project is $2,600. Flake runs $6.50-$10 per sq ft, or $2,600-$4,000 for a two-car garage up to 400 sq ft. For comparison, solid color is $9.50-$11.50 per sq ft ($3,800-$4,600), metallic $12.50-$18.50 ($5,000-$7,400), quartz $9-$16.50 ($3,600-$6,600) and grind and seal $6.50-$9 ($2,600-$3,600). We quote after seeing the slab.
The flake system is installed in one day. That covers grinding, repairs, basecoat, flake broadcast, cleanup and topcoat. Heavily damaged slabs or unusually large areas can change the plan, and we confirm the schedule with you before the crew arrives so there are no surprises.
It means flake is scattered into the wet basecoat until the coating cannot accept any more, then the surplus is scraped and vacuumed away. The method produces dense, even coverage with no see-through spots and a more consistent look than a light broadcast.
Flake adds a fine texture that offers more grip than a smooth gloss coating. If you want additional traction, for example near a wet entry or a sloped area, ask us about adding a slip-resistant additive to the topcoat when we plan the job.
Sweep or dust mop regularly, then wash with warm water and a mild cleaner using a soft mop or deck brush. Avoid harsh solvents and abrasive pads. Wiping up chemical spills promptly keeps the topcoat looking its best for years.
Yes. We offer flake and marble flake collections in a range of colors and blends. Our color chart gives you an overview, and we bring samples to the estimate so you can see how a blend looks in your own lighting before committing.
We are based in Santa Clarita and serve the Santa Clarita Valley, the San Fernando Valley, Simi Valley and the Antelope Valley. Call (661) 457-5812 to confirm that your address is in range and to schedule a free estimate for your garage, shop or other space.
They are called flake epoxy floors, and you will also hear decorative flake, epoxy chip or full-flake floors. Colored flakes are broadcast into a wet epoxy basecoat, then sealed with a clear topcoat. The result is a speckled, textured surface that hides dust and tire marks and installs in one day.
How long a flake floor lasts depends mostly on slab preparation, traffic and the topcoat. We diamond-grind the concrete, use a moisture-barrier epoxy basecoat and finish with a UV-stable polyaspartic topcoat, which resists wear, hot-tire pickup and sun. A limited lifetime adhesion warranty covers the bond between the coating and your slab.
They do different jobs. Epoxy is the strong, bonding basecoat that fills and seals the slab. Polyaspartic is the clear topcoat that cures fast, resists yellowing and handles hot tires. The best flake floors use both, which is how we build ours, rather than choosing one over the other.
Using our flake range of $6.50 to $10 per square foot, 1,000 square feet runs about $6,500 to $10,000. Solid color is about $9,500 to $11,500, quartz $9,000 to $16,500 and metallic $12,500 to $18,500 at the same size. Final pricing depends on slab condition and repairs, so we confirm a fixed price after a free measure.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Call (661) 457-5812 or send the form at the top of the page. We reply the same day with a time to measure.