Elevate Epoxy Flooring brings epoxy, polyaspartic, metallic, solid color, quartz and flake floor coatings to Newhall garages, patios, driveways, workshops, storefronts and industrial floors.
Elevate Epoxy Flooring, based in nearby Santa Clarita, installs epoxy and polyaspartic floor coatings in Newhall homes, workshops, patios, driveways and commercial spaces. We diamond grind every slab, use VOC-free materials, and provide a limited lifetime adhesion warranty. Call (661) 457-5812 to request an estimate.
Newhall is the oldest community in Santa Clarita, and its housing shows it. Streets like those in Happy Valley and around Old Town hold older homes with older concrete, while newer pockets such as Valle Di Oro were built much more recently. That mix means no two garage slabs behave the same. Some carry hairline cracks and years of oil staining, others are smooth and fresh but still unprotected. Elevate Epoxy Flooring is a service-area business based in Santa Clarita, so Newhall is close to home for our crews. We install epoxy, polyaspartic, metallic, solid color, quartz and flake systems for garages, patios, driveways, workshops and commercial floors.
We begin by reading the slab. Diamond grinding removes weak surface material and creates the bonding profile that a coating needs, then we repair cracks and joints and test for moisture. On older slabs, a moisture-barrier epoxy basecoat is especially valuable because it blocks vapor before it can lift the finish. A UV-stable polyaspartic topcoat closes the system and resists hot-tire pickup, chemicals and sunlight. Every material we use is VOC-free, and every installation is covered by a limited lifetime adhesion warranty, so you know what you are getting before the first pass of the grinder.
We install floors throughout Newhall and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: City of Santa Clarita
Newhall has hot, dry summers, with midsummer afternoons in the low 90s, and mild winters when most of the year's rain falls between December and March. Sun-baked driveways, patios and garage slabs take constant UV and swing between hot days and cool nights. That is why a UV-stable polyaspartic topcoat matters, since it resists fading and softening under hot tires. A moisture-barrier epoxy basecoat matters just as much after a wet winter, when vapor can push up through older concrete and undermine a thin coating.
Parts of Newhall, including Happy Valley and the streets near Old Town, are some of the longest-settled residential areas in the valley. Older homes often have garages that were poured years ago, with settled cracks, pitted surfaces and stains that go deep into the concrete. We treat each of these conditions before any coating goes down, filling cracks and smoothing the surface so the finish looks even. A flake system is a strong match for older garages because the full-rejection flake broadcast adds texture and hides the signs of age, and it is installed in a single day. If you want a showroom look, solid color is installed over three days.
Placerita Canyon brings a very different kind of property: spacious lots with custom and ranch-style homes, and often detached garages, workshops and patios. Those spaces often handle dirt, tools, equipment and exposure to the elements. A coated shop floor cleans up quickly and resists oil, solvents and abrasion. On patios, driveways and open slabs, a UV-stable polyaspartic topcoat holds its color in direct sun, and a fine texture keeps footing secure when rain or a hose makes the surface wet. We can coat several buildings on one property in a single scheduled visit, which saves time for owners with multiple slabs.
Old Town Newhall is the historic center of Santa Clarita, with restaurants, shops, theaters and a library in and around its older buildings. Spaces like these need floors that clean easily, handle foot traffic and survive spills. Commercial kitchens, prep areas, retail floors, back rooms and small workshops all benefit from a seamless epoxy or polyaspartic surface, since there are no grout lines to trap grease and moisture. We schedule around business hours when possible and can coat in phases, so you can keep serving customers. Tell us about the space, and we will suggest a system that fits your traffic and cleaning routine.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed October 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
Choose flake for the best value and the most forgiving look, solid color for a clean uniform floor, and metallic for a one-of-a-kind showpiece. Flake takes about one day, solid color three days, and metallic three to four. Flake costs $6.50 to $10 per square foot, solid $9.50 to $11.50, and metallic $12.50 to $18.50.
Read the answer →Neither is simply better. Epoxy bonds well to prepared concrete, builds thickness, and works as a moisture-barrier basecoat. Polyaspartic resists sun yellowing and cures fast, which makes it a strong topcoat. For most garages the best system pairs an epoxy basecoat with a polyaspartic topcoat, so each material does the job it does best.
Read the answer →Hot tire pickup is when warm tires soften or pull at a garage floor coating, leaving marks, ridges, or peeled patches where the tires sit. You prevent it with thorough diamond grinding, a well-bonded quality basecoat, a UV-stable polyaspartic topcoat, and giving the floor its full cure time before parking.
Read the answer →Epoxy peels when it never bonded properly to the concrete. The usual causes are poor surface preparation, moisture vapor rising through the slab, a thin or low-quality coating, oil or old sealer left on the surface, and driving or parking on it before it cured. Fixing it means removing the failed coating and re-preparing the slab.
Read the answer →Timing depends on the system you choose. A flake floor is finished in one day, a quartz system takes two to three days, solid color takes three days, and a metallic floor takes three to four days. At your estimate we explain when you can walk on the floor and when it can handle vehicles.
In most cases, yes. After diamond grinding, we repair cracks and joints and fill pitted areas so the surface is sound before coating. Older slabs sometimes carry more moisture, so a moisture-barrier epoxy basecoat is important. We inspect the concrete during the estimate and tell you plainly what it needs.
Hot-tire pickup is the result of poor bonding or a coating that softens when a tire gets hot. We prevent it with diamond grinding for a proper bonding profile, a moisture-barrier epoxy basecoat, and a UV-stable polyaspartic topcoat that is built to hold up under heat and daily driving.
Both work well. Flake adds texture and hides dust, tool marks and small stains, and it installs in one day. Solid color gives a bright, uniform surface that makes tools and spills easy to see, and it takes three days. If you want something more decorative, metallic takes three to four days.
Yes. For outdoor concrete and wet areas we add a fine non-slip texture to the finish so footing stays reliable when the surface is damp. The UV-stable polyaspartic topcoat resists sun fading, and the coating rinses clean with a hose, which works well for Newhall patios and decks.
We can usually work with your hours. Depending on the space, we coat in sections, work after closing, or plan around slower days. VOC-free materials help keep odors low. Share the size of the space and your operating hours, and we will propose a schedule that limits disruption to your business.
Call (661) 457-5812 or send the form at the top of the page. We reply the same day with a time to measure.